Mypro CLM431
Este producto ya no se encuentra disponible.
Consulte la nueva generación en la sección predecesor / sucesor o contacte con su entidad local de Endress+Hauser.
Documentos / Manuales / Software
-
Conductivity Measurement mypro CLM431
Two-wire transmitter for conductivity and MΩ with Hart® communication
for use in Ex and non-Ex areasTechnical Information (TI) -
Technical Information MYPRO CL
Two-wire transmitter for inductive measurement of conductivity in Ex and
non-Ex areas with HART® or PROFIBUS communicationTechnical Information (TI) -
Technical Information MyPro CLM 431 conductive
Two-wire transmitter for conductive
measurement of conductivity and
specific resistance in Ex and non-Ex areas
with HART ® or PROFIBUS communicationTechnical Information (TI) -
Operating Instructions MyPro CLM 152 inductive
Two-wire transmitter for inductive conductivity with HART
communication.Manual de instrucciones (BA) -
Operating Instructions MyPro CLM 431
Two-wire-transmitter for conductive conductivity with PROFIBUS
communication.Manual de instrucciones (BA) -
Operating Instructions MyPro CLM 431 conductive
Two-wire-transmitter for pH with HART communication.
Manual de instrucciones (BA) -
Operating Instructions MyPro CLM 152 inductive
Two-Wire transmitter for inductive conductivity with PROFIBUS
communication.Manual de instrucciones (BA) -
Ex Safety Instructions Mypro CXX431-H
Sicherheitshinweise für explosionsgefährdete Bereiche.
Safety instructions for hazardous areas.
Conseils de sécurité pour zones explosibles.Ex Safety Instructions (XA) -
MyPro CPM431 / CLM431 spare parts and disassembling
Special documentation
MyPro CPM431 / CLM431 spare parts and disassemblingSpecial Documentation (SD) -
Instructions for service kits MyPro MEK
Special documentation
Instructions for service kits MyPro MEK / CLM431 / CLD431 / CPM431Special Documentation (SD) -
Acid / Base concentration measurement
Concentration and interphase detection for CIP system using conductivity
for accurate measurementCase Studies (CS)06/07Inglés -
CIP system using conductivity maintains sanitary conditions
CIP (Clean-in-Place) is used in many operations to maintain sanitary
conditions in processesCase Studies (CS)06/07Inglés -
GSD Single, GSD_EH_PA_AN_Mypro_0x150C_V02_0x_PALIB, 22.04.2014 (Analysis,
Mypro, 0x150Cc)
PROFIBUS PA,
PROFIBUS System Version: AnyGeneral Station Description (GSD)2.00.00Language neutral -
EDD Single, PDM_PA_AN_Mypro_0x150Ci_0x02_0x01, 07.01.2019 (Analysis, Mypro, 0x150Ci)
PROFIBUS PA,
PDM Version: 6.0 SP5Electronic Data Description (EDD)1.00.00Language neutral -
EDD Single, PDM_PA_AN_Mypro_0x150Cc_0x02_0x01, 07.01.2019 (Analysis, Mypro, 0x150Cc)
PROFIBUS PA,
PDM Version: 6.0 SP5Electronic Data Description (EDD)1.00.00Language neutral -
DTM Single, MyproCond_C_CLx431_PA_V2_0, 20.10.2020 (Analysis, Mypro, 0x150Cc)
PROFIBUS PA,
DeviceCare Version: 1.07.00
Field Xpert - SMT70 Version: 1.05.00
FieldCare Version: 2.15.00Device Type Manager (DTM)1.5.153.348Language neutral -
DTM Single, MyproCond_I_CLx431_PA_V2_1, 20.10.2020 (Analysis, Mypro, 0x150Ci)
PROFIBUS PA,
DeviceCare Version: 1.07.00
Field Xpert - SMT70 Version: 1.05.00
FieldCare Version: 2.15.00Device Type Manager (DTM)1.5.153.348Language neutral -
DTM Single, MyproCond_C_CLx431_V2_05, 26.10.2020 (Analysis, Mypro, 0x008D)
HART,
DeviceCare Version: 1.07.00
Field Xpert - SMT70 Version: 1.05.00
FieldCare Version: 2.15.00Device Type Manager (DTM)1.4.188.39Language neutral -
DTM Single, MyproCond_I_CLx431_V2_10, 26.10.2020 (Analysis, Mypro, 0x008E)
HART,
DeviceCare Version: 1.07.00
Field Xpert - SMT70 Version: 1.05.00
FieldCare Version: 2.15.00Device Type Manager (DTM)1.4.188.39Language neutral
Accesorios / Piezas de repuesto
-
-
Order code 51501298
Connector Profibus PA MYPRO
-
-
Predecesor
-
Sucesor
